AeroLoc 200-5100 Series
AeroLoc 200-5100 Series have a bail handle head style with countersunk hole fixings.
AeroLoc quarter turn fasteners are grip range sensitive. To select the required stud size you will need to establish the Grip. This is the panel and frame thicknesses combined: P + F = G (see Fig 1)
Once you have determined your grip size (G), select a stud part number from Table 1 below.
Specifying your AeroLoc
1. Refer to Table 1 and select the stud dash number for your grip (G).
2. Configure assembly part numbers:
Table 1: AeroLoc standard grip range
Fig 1
Table 1: Dimensions mm (in)
Table 2: AeroLoc large grip range
AeroLoc is now available in larger grip ranges. Only refer to 'Table 2' for grip ranges larger than 11.95mm.
These larger grip ranges use the 205-3000 receptacle, rather than the standard 205-1000 receptacle.
Not sure what to order?
Contact our technical sales team for assistance
Table 2: For grip ranges longer than 11.95mm only. Dimensions mm (in)
Ordering your AeroLoc
Example Order 1:
Grip (G) = 5mm
200-5107 : Bail handle, countersunk fixing
205-9008 : Shim 0.8mm
205-1000 : Receptacle
Example Order 2:
Grip (G) = 8mm
200-5110 : Bail handle, countersunk fixing
Shim : No shim required
205-1000 : Receptacle
